Difference Between AC and DC Resistance – Which One is More?

Difference Between AC & DC Resistances & How to Calculate it?

Resistance

The property of a substance or material which oppose the flow of electricity through it is called resistance OR,

Resistance is the ability of a circuit or element (which is called resistor) to oppose the flow of current through it.

Examples of Resistors with the ability of high resistance are Wood, Air, Mica, Glass, Rubber, Tungsten etc.

Unit of Resistance is “Ohm” and it is denoted by and it is represented by “R”.

Difference between AC and DC Resistance and How to calculate it

 

AC Resistance

In Simple words, Resistance in AC circuits is called Impedance. Or

The Overall resistance (Resistance, Inductive reactance and Capacitive reactance) in AC circuits is called Impedance (Z).

Explanation:

When AC Current pass through a wire (resistor, inductor, capacitor), then current produces a magnetic field across that wire which opposes the flow of AC Current in it along with the resistance of that wire. This oppose cause is called Inductance or Inductance is the property of Coil (or wire) due to which opposes any increase or decrease of current or flux through it. Also, we know that inductance is only exist in AC because the magnitude of current continuously changing

Inductive Reactance XL, is the property of coil or wire in an AC circuit which opposes the change in the current. The unit of Inductive reactance is same as Resistance, capacitive reactance i.e. Ohm (Ω) but the representative symbol of capacitive reactance is XL.

Likewise,

Capacitive Reactance in a capacitive circuit is the opposition to current flow in AC circuits only. The unit of capacitive reactance is same as Resistance, Inductive reactance i.e. Ohm (Ω) but the representative symbol of capacitive reactance is XC.

Measuring AC Resistance

Electrical Resistance & Impedance Formulas in AC Circuits

In AC Circuits (Capacitive or inductive Load), Resistance = Impedance i.e., R = Z

Z = √ (R2 + XL2)… In case of Inductive Load

Z = √ (R2 + XC2)…In case of Capacitive Load

Z = √ (R2 + (XL– XC)2…In case of both inductive and capacitive Loads.

Good to know:

Where;

XL = Inductive reactance

XL = 2πfL…Where L = Inductance in Henry

And;

XC = Capacitive reactance

XC = 1/2πfC… Where C = Capacitance in Farads.

DC Resistance

We know that there is no concept of Inductive and capactive reactances in DC Circuits. i.e. capacitive and inductive reactances in DC circuits zero because there is no frequency in DC circuits, i.e. magnitude of DC current is constant. Therefore, only the original resistance of wire comes into play.

Good to know:

That’s why the resistance offered by a wire is lower for DC than AC as will as AC lines need more insulation than DC.

Measuring DC Resistance

Electrical Resistance Formulas

In DC Circuits, we calculate the resistance by Ohm’s Law.

R = V/I.

Good to know:

When solving electric circuits for finding resistance and you are not sure which one should you take into account whether AC or DC resistances, then, if the current passed is AC, then take AC resistance else if the current passed is DC, take DC resistance.

Which One is More – AC or DC Resistance ?

As we know that frequency in DC supply is zero, so there is no skin effect (a behavior of alternating current to flow through the surface i.e. outer layer of a conductor instead of the core of the wire). in DC circuits. Due to the skin effect, AC resistance are more in AC circuits than DC supply in DC circuits.

Skin Effect Formula

δ = √(2ρ/ωµ)

Where;

In short, frequency is directly proportional to the skin effect i.e. if frequency increase, skin effect also increase where, there is no frequency and skin effect in DC.

As a rule of thumb;

AC Resistance = 1.6 x DC Resistance

Related Posts:

Exit mobile version