EMF Equation of a Transformer

Transformer’s EMF Equation

The magnitude of the induced electromotive force (EMF) or voltage in a transformer can be determined by the EMF equation of the transformer. When a source of alternating current (AC) is applied to the primary winding of the transformer, known as the magnetizing current, it produces alternating flux in the transformer’s core.

The produced alternating flux in the primary winding of the transformer becomes linked with the secondary winding through mutual induction. Since it is alternating flux in nature, there must be a rate of change of flux, according to Faraday’s law of electromagnetic induction, which states that if a conductor or coil is linked with any changing flux, there must be an induced EMF in it.

The same happens in transformers as well as induction motors as induction motor is fundamentally a transformer.

• Related Post: Power Transformers Maintenance, Diagnostic & Monitoring

EMF Equation of Electrical Transformer

Now, let’s learn how to determine the magnitude of the induced EMF in a transformer using the transformer’s EMF equation.

Lets,

• N₁ = Number of turns in primary windings.    
• N₂ = Number of turns in second windings.
• Φ_m = Maximum flux in the core in Weber = (Φ_m = B_m.A)
• f = Frequency of A.C input in H_z.

Related Post: EMF equation of an Alternator or AC generator

As shown in the fig above, the flux increases from its zero value to the maximum value Φ_m  in one quarter of the cycle, i.e. in ¼ second.

Average rate of change of flux = [ Φ_{m /} (¼ f.)]

= 4f Φ_m Wb/s or volt

Now rate of change of flux per turn means induced EMF in volts.

Average EMF / per turn = 4f Φ_m volt.

If the flux Φ_m varies sinusoidally, then RMS value of induced EMF is obtained by multiplying the average value by the form factor.

Form Factor = RMS value / Average value = 1.11

RMS value of EMF / turn = 1.11. 4f Φ_m= 4.44f Φ_m volt

Now, consider the RMS value of the induced EMF across the entire primary winding.

= ( induced EMF / turn) x number of primary turns

E₁ = 4.44 x f x N₁ Φ_{m ……….. (i)}

E₁ = 4.44 xf N₁ B_m A … [as  (Φ_m = B_mA)]

Similarly, the RMS value of the EMF induced in the secondary winding is,

E₂ = 4.44 x f N₂ Φ_{m ……….. (ii)}

E₂ = 4.44 x f N₂ B_m A.  … [as  (Φ_m= B_mA)]

It’s seen from (i) and (ii) that: EMF Equation of the Transformer =

E₁ / N₁= E₂ / N₂ = 4.44 x f Φ_{m.  …… (iii)}

It means that EMF / turn is the same in both the primary and secondary windings in the transformer i.e. flux in Primary and Secondary Winding of the Transformer is same.

Moreover, we already know that from the power equation of the transformer, i.e, in ideal Transformer (there are no losses in transformer) on no-load,

V₁ = E₁

and

E₂ = V₂

Where,

• V₁ = supply voltage of primary winding
• E₂ = terminal voltage induced in the secondary winding of the transformer.

Related Post: Transformers Fire Protection System – Causes, Types & Requirements

Voltage Transformation Ratio (K)

As we have derived from the above EMF equation of the transformer (iii);

E₁ / N₁= E₂ / N₂ = K

Where,

K = Constant

The constant “K” is known as voltage transformation ratio.

• If N₂ > N₁, i.e. K > 1, then the transformer is known as a step-up transformer.
• If N₂ < N₁, i.e. K < 1, then the transformer is called step-down transformer.

Where,

• N₁ = Primary number of turns of the coil in a transformer.
• N₂ = Secondary number of turns.
  

Power Equation of the Transformer

We have already discussed it in our previous post which can be seen it here.

Related Posts:

• Transformer Efficiency, All day Efficiency & Condition for Maximum Efficiency
• Can we operate a 60HZ Transformer on 50Hz Supply Source and Vice Versa?
• Which Transformer is More Efficient When Operates on 50Hz or 60Hz?
• How to Calculate the Rating of Transformer in kVA (1 Phase and 3 Phase)?
• Current Transformers (CT) – Types, Characteristic & Applications